5804 BDV
  Lynxr-En
  Vista 10P
 Vista 20P
  Vista 30PSE
  Vista 32FB
  Vista 40
  Vista 50P
  Vista 128-250BP
Vista 128-250FBP

Ademco VISTA-132FB

The VISTA-32FB provides access control integration and features an automatic smoke detector, calibration maintenance alert for addressable V-Plex™ and wireless commercial photoelectric detectors. The alarm control offers two partitions in a UL Listed Commercial Fire and Burglary 8-zone standard control panel supporting up to 32 zones/points using hardwired, compatible wireless devices and addressable V-Plex technologies. It also supports expandable initiating and notification circuits, digital dialers, annunciator/keypads, RF receivers and programmable relays. Two on board notification (bell) circuits deliver 2.3A at 12V.

 

 

Vista32FB Installation Guide PDF
Ademco Vista 32FB User Guide PDF

Ademco Burglar Alarms By Honeywell

Ademco Security Systems On-Line Store
Ademco Wireless Devices Shop Here

. Can control 8 separate areas (partitions) independently, each functioning as if it had its own separate control. All fire zones must be assigned to partition 1.

. Provides a Common Lobby partition, which can be programmed to arm automatically when the last partition is armed, and to disarm when the first partition is disarmed.

. Provides a Master partition (3 for the VISTA32FB; 9 for the VISTA-128FB), used for the purpose of viewing the status of all partitions at the same time.

. Can display fire, burglary, panic, and trouble conditions at all other partitions’ keypads (selectable option).

Scheduling

. Can automate system functions, such as arming, disarming, and activation of outputs (e.g., lights).

. Provides access schedules (for limiting system access to users by time).

. Provides an End User Output Programming Mode, allowing the user to control outputs.

Access Control

. Supports up to 8 VistaKey modules (8 access points) (4 modules on the VISTA-32FB), which are used for access

control. It is a single-door access control module.

. Support up to 250 access cards.

. Supports ADEMCO PassPoint system via one VISTA Gateway Module (VGM), for a fully integrated access control system.

. Can store access control events in the event log.

System Communication

. Provides supervision of the phone lines (main and backup)

. Supports the 5140DLM optional backup dialer for the second phone line.

. Supports ADEMCO Contact ID; ADEMCO High Speed; ADEMCO Express; and 3+1, 4+1, and 4+2 ADEMCO and Sescoa/Radionics Low-Speed formats.

Section 1 – General Description

The system is shipped defaulted for Contact ID communication. It is the only format capable of uniquely reporting all 128 zones, as well as openings and closings for all 150 users. This requires central stations to be equipped with the ADEMCO 685 receiver using software level 4.10 or higher to fully support all new VISTA-32FB/VISTA-128FB report codes. If you need to update your 685 receiver, contact your distributor.

. Can send messages such as alarms, opens/closes, etc. to a paging service (this requires the installation of the

4100APG Pager Interface).

. Supports Dynamic Signaling feature, which prevents redundant signals being sent to the central station when both the built-in dialer and Long Range Radio are used.

. Provides an Audio Alarm Verification (AAV) option that permits voice dialog between an operator at the central station and a person at the premises. An AAV unit, such as ADEMCO UVS, is required.

Downloading

. Supports upload and download capability.

. Can download access control cardholder information.

Event Log

. Provides an event log (history log) that can store up to 512 events.

. Can print the event log on a serial printer.

. Can view the event log on an alpha keypad.

Fire Walk-Test Mode

. Provides an automatic test of integrated V-Plex devices that have the automatic test feature.

. Can display all fire zones that remain untested.

. Can log test results in the event log.

. Can report the test results to the central station.

Additional Features

. Provides two style-Y supervised Notification Appliance Circuits.

. Provides an auxiliary relay (form C) that can activate alarms troubles/supervisories, reset 4-wire smoke detectors, or as a battery saver (removes power form non-critical loads 4 hours after AC power loss).

. Provides up to 60 installer-defined, custom words that can be used for zone descriptors.

. Provides 35 keypad macro commands (each macro is a series of keypad commands of up to 32 keystrokes) using the

A, B, C, and D keys by partition.

. Provides cross-zone capability, which helps prevent false alarms by preventing a zone from going into alarm unless its cross-zone is also faulted within a 5-minute period.

. Contains a built-in User’s Manual, which provides the end user with a brief explanation of the function of a key when the user presses any of the function keys on the keypad for 5 seconds.

. Provides trigger outputs, which may interface with Long Range Radio equipment or other devices such as keyswitch LEDs, or printer.

. Provides Maintenance Signal support for certain smoke detectors (5808, 4192CPM, 4192SDM, 4192SDTM, 5192).

At least one 2-line alpha keypad (6139/6160) must be connected to the system for programming (if you are using keypad programming), and must remain connected to the system in order to allow the primary user to program additional user codes into the system at a later time.