|
|
Visonic WR2002B 2-Channel Receiver
|
Complete Description Below:
Ordering And Information Above.
|
|
|
New Page 2
Visonic WR2000B Dual-Output 12-Bit Wireless Receiver
The WR-2002B is a dual-output wireless receiver operating in conjunction with a wide
variety of Visonic 12-bit wireless devices, including portable and door/window
transmitters, motion, glass-break and smoke detectors, coded keypads and range-extending
repeaters. Designed for security, alarm and control applications, the WR-300/2B is easily
integrated into virtually any security and remote control system.
To ensure secure wireless communications, the WR-2002B receiver only responds to
transmissions that include the same system code. Users select a system code from 256
possible combinations, and quickly apply it system-wide, using the 8-position DIP switch
on each device.
Each of the two relay outputs is programmed to a different communication channel of the
transmitters. Each channel may be used for any type of alarm: emergency call, motion,
glass-break, smoke, etc. If the correct system code and channel are detected, the
WR-2002B responds by activating the corresponding relay output or outputs. In addition,
the WR-2002B monitors the transmitters' battery charge, via a separate voltage output and
a supplied buzzer.
The WR-2002B dual-output wireless receiver is available in two optional frequencies in
compliance with European, U.S. and other international standards, and is approved for use
by local authorities in most countries.
Installation
Manual
WR-300/2B Features:
- Designed for security, alarm and control applications.
- 2 relay outputs, each set to a different channel of the transmitters.
- Easily integrated into virtually any alarm control panel.
- Secure communication with transmitting device based on user-defined system code
(selected from 256 possible combinations).
- Supports flexible zoning of the remote transmitters – instant, delayed, fire,
silent alarm, etc.
- Low-battery supervision to ensure continuous system operation at all times.
- 11-14 Volt DC or AC power supply.
- Available in two optional frequencies in compliance with international standards.
- Supports the complete variety of Visonic 12-bit devices.
|
|
|
|
| 
