|
|
Winland WB200 Water Bug Main Unit
|
Complete Description Below:
Ordering And Information Above.
|
|
|
Winland WB-200 Water Sensor Kit
Includes:
1-WB-200 Processor.
1-WB-1040 Remote Probe
| Waterbug - 12 or 24 VAC or VDC (WB-200)
PN# 1043
Electronic water detection at its best!
The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be
connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six
sensor probes, up to 100 feet away. Each sensor probe has two contacts. When a film of
water forms a bridge between these contacts, the unit senses this and triggers the alarm
output. The sensor will not alarm due to condensation or high humidity. One standard
surface sensor is included with the unit.
|
Typical Applications:
- Residential or Vacation Homes
- Basement Sump Pumps
- Commercial Buildings
- Office and Computer Areas
- Unattended Buildings
- Greenhouses & Animal Buildings
- All Drain Areas
- Sprinkler Systems
|
Features:
- Versatile 12 or 24 Volt AC/DC power for operation
- No false alarms due to condensation or humidity
- Can monitor up to 6 sensor probes - up to 100 feet away
- Provides (1) form "C" contact closure output for alarm
- Easy surface mount installation
- One year parts and labor; subject to conditions of limited warranty.
|
Accessory Options:
- Standard surface sensor - P/N 1040
- Under carpet sensor - P/N 1041
- Wall Transformer P/N 1111
- Voltage: 110 VAC - 12VDC regulated, 300mA.
|
Specifications:
- Console Size: 5" x 2.44" x 1.25" (12.7 cm x 6.2 cm x 3.18 cm)
- Probe Size (standard P/N #1040): 2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2
cm)
- Probe Size (under carpet P/N #1041): 2" x 3" x 0.18" (5.1 cm x 7.6 cm x
0.5 cm)
- Power Requirements (resting state): 12V or 24V AC or DC
- Power Requirements (alarm condition): 5mA @ 12V or 24V AC, or 13.5mA @ 12V or 24V DC
- Sensitivity: Will not alarm due to high humidity or condensation
- Operating Temperature: Control and Probe 32? to +140? F (0? to +60? C)
- Outputs: Form C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct high voltage
switching)
- Recomended Dist. Between Probes & Console: 1-2 probes: 200ft (61 m) max. Ç 3 or
more probes: 100ft (30.5 m) per probe
- Recommended Max. Probes Per Console: 6
|
|
|
|
|
| 
