Winland WB800 8 Channel Water Detector

Winland Waterbug - 8 zone, 12or 24 VAC/VDC (WB-800)

Includes:

1-WB-800 8 Zone Processor.
4 WB-1040 Surface Probes.

PN# M-001-0005]

Eight zone water detection monitoring - Microprocessor controlled.

The model WB-800 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit also includes internal alarm buzzer with silence switch and eight LEDs on console to identify the sensor in alarm. As many as eight supervised sensor probes can be run up to 500 feet away (or 16 non-supervised sensors). Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. Four standard surface sensors are included with the unit.

Typical Applications:

Residential or Vacation Homes
Basement Sump Pumps
Commercial Buildings
Office and Computer Areas
Unattended Buildings
Greenhouses & Animal Buildings
All Drain Areas
Sprinkler Systems

Features:

Reliable microprocessor design
Versatile 12 or 24 Volt AC/DC power for operation
No false alarms due to condensation or humidity
Can monitor up to 8sensor probes - up to 500 feet away
Provides (1) form "C" contact closure output for alarm
Internal audible alarm with silence switch
Easy surface mount installation
One year parts and labor; subject to conditions of limited warranty.

Accessory Options:

Standard surface sensor - P/N 1040
Supervised surface sensor - P/N M-001-0006
Under carpet sensor - P/N 1041
Wall Transformer P/N 1111
Voltage: 110 VAC - 12VDC regulated, 300mA.

Specifications:

Console Size: 6.55" x 4.70" x 1" (16.6 cm x 11.9 cm x 2.5 cm)
Probe Size (standard P/N #1040): 2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm)
Probe Size (under carpet P/N #1041): 2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm)
Power Requirements: 12V or 24V AC or DC
Current Draw (resting state): 75mA @ 12V or 24VDC, or 200mA @ 12V or 24VAC
Current Draw (alarm condition): 125mA @ 12V or 24VDC, or 330mA @ 12V or 24VAC
Sensitivity: Will not alarm due to high humidity or condensation
Operating Temperature: Control and Probe 32? to +140? F (0? to +60? C)
Outputs: Form C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct high voltage switching) � Audible alarm with silence feature
Recommended Dist. Between Probes & Console: 500ft (152.4 m) maximum
Recommended Max. Probes Per Console: 8 supervised or 16 non-supervised