|
|
Linear XR1 Alert 1-Channel Receiver
|
Complete Description Below:
Ordering And Information Above.
|
|
|
Linear Xtended
Range XR-1
1-Channel
Receiver
Model Number: XR-1
Installation Manual
Features
- Up to 10 Miles of Line-of-Sight Range (XT-1, XT-4).
- Up to Two Miles of Line-of-Sight with Handheld Devices.
- Superheterodyne Receiver Technology.
- Over 64,000 Codes.
- Form "C" Alarm Output (XR-1 and XR-4).
- Open Collector Alarm Outputs (XR-16).
- Weather-Resistant Case (XR-1, XR-4, XR-D).
- Power On and RF Activity Indicators.
- Complete RF Supervision of XT-1 and XT-4 Transmitters (Field Enabled).
General
Specifications |
| Operating
Voltage: |
12 to 15.o
VDC |
| Operating
Current: |
(See specific
transmitter type) |
| Operating
Temperature: |
-4° to
+140° F (-20° to +60° C) |
| Receiver
Type: |
Superheterodyne |
| Sensitivity: |
-118 dB
(minimum) |
| Selectivity: |
6 KHz |
| Carrier
Frequency: |
27,255 MHz |
| Number
of Codes: |
65,536 |
| Code
Setting Method: |
DIP switch
programming |
| Data
Input: |
Alarm,
restore, status, and low battery |
| Status
Exception Time Frame: |
Four hours |
| Antenna
Impedance: |
50 Ohms (not
supplied: see ANT-1, ANT-2) |
ADDITIONAL XR-1 SPECIFICATIONS |
| Dimensions: |
4.25 in L x
2.5 in W x 6.25 in H (108 x 64 x 159 mm) |
| Weight: |
1 lb. (0.454
Kg) |
| Current
Drain: |
XR-1 -25 mA, typical
standby 65 mA alarm @ 12 VDC
XR-4 - 24 mA, typical standby 185 mA alarm @ 12 VDC |
| Outputs: |
Alarm - form
"C" relay per channel (XR-1, XR-4)
Status exception - one open collector output per receiver
Low Battery - one open collector output per receiver
Audio and signal strength test points |
|
|
|
|
| 
