|
|
Visonic MCX600 Power Max Wireless Repeater
|
Complete Description Below:
Ordering And Information Above.
|
|
|
Visonic MCX600 Power Max Wireless Repeater
PowerCode™ Wireless Repeater
The MCX-600 wireless repeater extends the communication range of PowerCode™ solutions
systems, by relaying data between any PowerCode™ receiver and remote wireless
transmitters. Up to 16 auxiliary repeaters can be positioned between the farthest group of
receivers transmitters and the receiver.
For maximum security, the MCX-600 repeater uses a unique, factory programmed, randomly
selected 24-bit digital alarm ID code during each transmission. This code is selected from
16 million possible code combinations and is therefore unique and virtually impossible to
accidentally reproduce.
Other important benefits of the MCX-600 include the unique anti-collision transmission
sequence, which ensures accurate reception of simultaneous signals from multiple
transmitters. The fully supervised repeater issues a test report on an hourly basis,
indicating faults such as power failure, low battery charge and tampering.
Powered by 13-20 VDC or 11-16 VDC power supply, the MCX-600 uses a 9-Volt nickel cadmium
rechargeable battery as a backup in case of power failure.
Installation
Manual
MCX-600 Features:
- Extends communication range between a PowerCode™ receiver and any wireless
PowerCode transmitter.
- Supports Visonic PowerCode™ wireless panels and receivers.
- Up to 16 repeaters can be used in a system.
- PowerCode™ ID factory-selected from 16 million possible combinations.
- Smart anti-collision mechanism supports multiple simultaneous transmissions.
- Fully supervised.
- Power supply options: 13-20 VDC or 11-16 VDC.
- 9-Volt nickel cadmium rechargeable backup battery.
- Compact and easily installed.
- Available in several optional frequencies in compliance with international standards.
|
|
|
|
| 
