Release 1.06 Upload/Download software supports both the Destiny 6100 and Destiny 6100AN control panels. Included with this release is a Windows 95 based Report Writer - ACCTRPTR.EXE. This Report writer reads account files and outputs a WordPad document containing all System Options, Zone Summary, User Codes, and Control Channels. This document can be viewed and/or printed.
INSTALLING THE PROGRAMS Double-click on the file 6100SUe.exe and follow the prompts to install the 6100 downloader in the directory of your choice. At this point, these files will have been installed:
README.TXT -- This file
UD6100e.EXE -- DOS Downloader executable file, English language
UD6100e.HLP -- Help files - not user readable
DESM.DEF -- Modem definition -- not user readable
ASAP.MDM -- Predefined modem setup parameters
DESTINY.IN4 -- Default account file for the Destiny System
DESTINYP.IN4 -- Default account file for the 6100 AN panel (paging)
NETWORK.TXT -- Instructions for storing account files on a network
EVENTLOG.DOC -- MS WORD document explaining how to use the NEW event log file
and examples
ACCTRPTR.EXE -- WIN95 utility to generate printable account information
ACCTRPTR.TXT -- Installation & use instructions for the account info utility If you will be using fewer than 512 accounts, you may now use the package by running d61ke and following the prompts. If you do not complete the steps below, you must run the program from within the directory (folder) that it is loaded. If you wish to use more than 512 accounts, the location of the program files must be added to the PATH variable and the environment variable UD must be added to tell the program where to find its utility files.
For example, if the directory (folder) you created to hold the upload/download package is C:\DEST61K, the following would be needed in the autoexec.bat file:
PATH=C:\DEST61K; . . . (other path info) . . .
SET UD=C:\DEST61K
Please refer to your Operating System manual for information on the creation and use of autoexec.bat files. You must tell the downloader which COM port your modem is using before you will be able to call a panel. This is in the menu Set Options under configuration. Using either COM1 or COM2 works best!! Whatever COM port you choose DO NOT use NON-STANDARD IRQ assignments, it WON'T WORK !
RELEASE NOTES: 10/22/1997 Production Release 1.00 English 1st public production release. Includes the WIN95 Account Report Writer utility to generate printable text files of account configuration/setup. 05/12/1999 Production Release 1.03 English 2nd public production release. Improvements to WIN95/98 Account Report
Writer. Support for paging options in Rev. 10.xx 6100 Panels. NOTE: Users of Rev 10.xx 6100 panels: Rev 10.x panels do not support partitions and split-arming, but do support paging options not supported by previous panels. In order to communicate with 10.x panels, you must launch the downloader with the command line option 'p.' Accounts created without the 'p' option will not communicate with 10.x panels, and accounts created with the 'p' option will not communicate with 8.x panels. One account type CANNOT, at this time be converted to the other. Use the following procedure to automatically launch the downloader with paging enabled: 1) Create a shortcut to the downloader executable.
2) Right-click on the shortcut and choose Properties.
3) Choose the Program Tab.
4) Add 'p' without the quotes, to the command line
5) Click OK
6) Rename the shortcut to remind you of its purpose. NOTE: Users of Rev 8.03 6100 panels: This downloader supports several options that the Rev 8.03 panels do not (subsequent panel releases do support all options in this package). While setting panel non supported options will NOT cause panel miss operation you probably won't get what you had in mind. The following is a list of the options that the panel doesn't support: Arming Options:
Prevent Entry to Program Mode if Armed General Options:
50Hz AC Line Frequency TS-16 As An Input:
TS16 Temperature Sensor Edits Trip Point(s) Usage None
High Limit Setting 0
Low Limit Setting 0
Hysteresis 1 Sunrise/Sunset Zone Type and Button type:
Sunrise/Sunset Polarity: ZONE OPEN = Night/Day Control Channel Edits:
Enable Flash Y/N
Speak for Activate word to speak
Speak for Restore word to speak
Filter Options Time of Day Activities:
Sunrise Activity None
Sunset Activity None Triggers:
Speech Activation
Ring Detect
House Phone Off Hook
Communicator Failure
Armed to NIGHT System Event Trigger Option Edits:
Activation Action On/Off/None
Restore Action On/Off/None If you have any questions about these options please refer to the Destiny 6100 Installation Instructions manual or call tech support. NOTE: Rev 10.x panels do not support partitions and split-arming, but do support paging options not supported by previous panels. In order to communicate with 10.x panels, you must launch the downloader with the command line option 'p.' Accounts created without the 'p' option will not communicate with 10.x panels, and accounts created with the 'p' option will not communicate with 8.x panels. | 
| 
