|
|
Xantech XtraLink2 17294RP IR Transmitter And Receiver Kit
|
Complete Description Below:
Ordering And Information Above.
|
|
|
New Page 1Xantech XtraLink2 17294RP IR Transmitter And Receiver Kit STOP Paying Those $13.00 Per Month Extra Cable Box Charges Kit Includes: - The complete 172 Xtra Link2 package includes the following:
- 1 - 291-00 Infrared Receiver.
1 - Injector.
1 - Coupler.
1 - 284M Dual IR emitter. Controls 2 Devices IE: Cable Box + VCR
1 - DC Power Supply.
2 - Coax jumper cables with RF connectors (U.S.A. version only). | The 170 started it all back in 1983. This version of the Xtra Link, Model 172, utilizes the 291-00 IR Receiver which has greatly improved range and interference rejection. The 291-00 receives the IR signals from a hand-held remote, converts them to DC control signals and passes them to the RF/IR Injector where they are mixed with the RF television signal. This combined signal is carried over a coaxial cable. At the other end of this coax the signals are separated at the RF/IR Coupler and the DC control signal is sent to an infrared emitter placed directly on the IR control window of the component you want to control. Installation Instructions
FEATURES - Attractive case for shelf top locations.
- Talkback red LED tests system for correct wiring as well as indicating infrared reception.
- The complete 172 Xtra Link2 package includes the following:
- 1 - 291-00 Infrared Receiver.
1 - Injector.
1 - Coupler.
1 - 284M Dual IR emitter. Controls 2 Devices IE: Cable Box + VCR
1 - DC Power Supply.
2 - Coax jumper cables with RF connectors (U.S.A. version only). -
- There are several versions of the Model 172 available as follows:
- 172-94 U.S.A. Full Kit You Are Looking At Now With 1 Transmitter + i Receiver. You Can Add As Many 172-94X Transmitters As You Want
172-94X kits are used along with one standard 172-94 when installing Xtra Links in more than one room. This avoids duplication of couplers, emitters and coax jumper cables.
| SPECIFICATIONS
- IR modulation freq. bandwidth: 30 - 100 kHz.
- Nominal reception range: > 30 feet.
- Nominal reception angle: 45 degrees off axis.
- Maximum current output: 100 milliamps.
- Maximum number of directly driven IR emitters: Up to two single or two dual emitters using the CPL94B Coupler.
- The CPL77 Coupler contains a 5-900 MHz 2-way RF splitter.
- Cable requirement: RG-59/RG-6 coaxial.
- Maximum cable length: One mile with RG-6.
- Power: 12 volts DC @ 10 milliamps. Power Supply Included.
- Dimensions of 291-00: 3-1/4 x 1 x 2 (83mm x 26mm x 51mm)
| | 
|
|
|
|
| 
