Complete Description Below: Ordering And Information Above.

Honeywell 5827 Wireless LED Keypad For Lynx And Vista

GENERAL

Installation Manual

The ADEMCO 5827 is a portable keypad, which can be used to arm and disarm the system and perform certain other system functions remotely. No audible or visual system status indications are provided by the 5827 (except for a Red LED indicator which lights when any key is depressed). Silent or audible Panic alarms (as programmed at the control receiver) can be initiated at the keypad. The unit may be left unmounted, resting on a table, countertop or other surface, or carried in a pocket or purse. Ensure that a transmission is received from each area where its usage is anticipated. A low battery condition in a Remote Wireless Keypad will be so indicated by the control receiver.

PROGRAMMING (House ID) The 5827 must be set for the system House ID (transmitter ID need not be programmed). See DIP switch table on other side.

SPECIFICATIONS

Dimensions: 4-3/4" (120mm) x 3-1/2" (89mm) x 1" (25mm)

LED: Lights when unit transmits.

Battery: 9-volt Alkaline, Ademco 464, Duracell MN1604, Or Eveready 522. 827-002-

SWITCH OPERATION, Just set your house code to match the house code in your panel, Default is 30.