GRI Pin Plunger and Tamper Switch

Complete Description Below: Ordering And Information Above.

GRI TSC20 Series Pin Plunger and Tamper Switch

Installation Instructions

As Plunger Switch

Mount the switch (surface or recessed) so the door or window will actuatethe plunger fully when it is closed. Run the leads into the hole or dress them along theside of the mounting box after soldering. Tes for continuity.

Adjust the self tapping screw on the plunger to get proper plunger action.

As Tamper Switch

Locate switch so removal of the covering plate or door will allow theplunger to be fully extended. Splice wires to tamper circuit and test.

Plunger Travel.............0.25

**FORM A (3012, 3015)

Voltage: 100 VAC/DC Max

Current: 0.5 A Max

Power: 7.5 W Max

Part Loop Electrical Listings

NumberType Configuration UL ULC

3012/3015 Closed N.O. * *

UL Specifications **European UnionSpecifications: 48VAC/DC Max., 0.5 Amp

ULC Specifications

All Contacts: 30 V DC, 50 ma max. Gap Specifications:*

See UL Gap Specifications