|
|
Linear XR1 Alert 1-Channel Receiver
|
Complete Description Below:
Ordering And Information Above.
|
|
|
Linear XtendedRange XR-1 1-ChannelReceiver
Model Number: XR-1 Installation Manual Features
- Up to 10 Miles of Line-of-Sight Range (XT-1, XT-4).
- Up to Two Miles of Line-of-Sight with Handheld Devices.
- Superheterodyne Receiver Technology.
- Over 64,000 Codes.
- Form C Alarm Output (XR-1 and XR-4).
- Open Collector Alarm Outputs (XR-16).
- Weather-Resistant Case (XR-1, XR-4, XR-D).
- Power On and RF Activity Indicators.
- Complete RF Supervision of XT-1 and XT-4 Transmitters (Field Enabled).
General Specifications | | Operating Voltage: | 12 to 15.o VDC | | Operating Current: | (See specific transmitter type) | | Operating Temperature: | -4° to +140° F (-20° to +60° C) | | Receiver Type: | Superheterodyne | | Sensitivity: | -118 dB (minimum) | | Selectivity: | 6 KHz | | Carrier Frequency: | 27,255 MHz | | Number of Codes: | 65,536 | | Code Setting Method: | DIP switch programming | | Data Input: | Alarm, restore, status, and low battery | | Status Exception Time Frame: | Four hours | | Antenna Impedance: | 50 Ohms (not supplied: see ANT-1, ANT-2) | ADDITIONAL XR-1 SPECIFICATIONS | | Dimensions: | 4.25 in L x 2.5 in W x 6.25 in H (108 x 64 x 159 mm) | | Weight: | 1 lb. (0.454 Kg) | | Current Drain: | XR-1 -25 mA, typical standby 65 mA alarm @ 12 VDC
XR-4 - 24 mA, typical standby 185 mA alarm @ 12 VDC | | Outputs: | Alarm - form C relay per channel (XR-1, XR-4)
Status exception - one open collector output per receiver
Low Battery - one open collector output per receiver
Audio and signal strength test points |
|
|
|
|
| 
