|
|
Ademco VISTA-20P Rev 5.2 Panel Transformer
|
Complete Description Below:
Ordering And Information Above.
|
|
|
This Is A Vista-20P REV-5.2 Control Panel And Transformer Only.
Vista 20PInstallation Instructions
Vista 20P UserInstructions 
AlsoSee Ademco 5800 Series Wireless Equiptment & Accessories.
NOTE: The Vista 20PS is Discontinued.
It is actually A Vista 20P REV-3. All 6270 Graphic Keypads Now Use Vista 20P REV 3 To REV5.
6270 Graphic Display Keypads Sometimes Work For Programming Sometimes Not. (notrecommended.)
If you choose to use only 1 6270 Keypad On Your System Call Us To Establish DownloadCommunications With Your New Control Before Doing Any Programming, So If Your 6270 StopsLetting You Into Programming We Can Program Your V20P REV5 From Our Office. The VISTA-20P Revision 3 and up is an eight-fourty eight zone control panelspecifically designed to support ADEMCO’s intuitive graphical user interfaces. Thegraphic user interfaces provide homeowners with the easiest way to operate their securitysystem and take advantage of home management features. Features Eight on-board hardwire zones standard (15 when Zone Doubling feature is used) Expandable to 48 total zones when used with hardwired and/or wireless expansion modules Wireless keys can be programmed without using zones 16 output devices
– Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or
– X-10® devices (when used with a 4300 Transformer) Two low current on-board trigger outputs 100 Event Log viewable at system keypads with time/date stamp 48 system user codes assignable to either partition Two independent partitions plus a common partition
– Global Arming from any system keypad
– Goto function to view or operate one partition from the other
– Separate partition account numbers Four installer configurable zone types allows the installer to create custom zone types by assigning all zone attributes Multiple actions on output devices depending on system state
– Turns lights off when system arms
– Turns the same light on when system disarms
– Flashes same lights when system is in alarm Built-in phone line cut monitor with programmable delay and annunciation options
– Display on system keypads
– Trigger local sounders
– Trigger system bell Supports four-wire, and up to 16 two-wire smokes
– Works with Sentrol CleanMe™ maintenance signal Valuable End User Features Compatible with ADEMCO’s Graphic User Interfaces Now viewable on system keypads:
– Exit countdown
– Time and date display*
– Event log* Auto keypad backlighting on entry Keyswitch arming Programmable macro buttons and single-button arming A variety of wireless remote controls for single-button operation User Scheduling
– Automatically activates X-10 and relays at programmed times
– Latchkey reports to pagers
– Auto arm/disarm
– User access time windows Supports up to four end user numeric pagers VIP Module allows system control from any touchtone phone Chime by zone Security Dealer Features False alarm prevention features to help reduce false alarms Automatic System Load Shed
– During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries Dynamic Signaling
– Reduces redundant reporting to the central station when multiple reporting methods are used,i.e. digital dialer and AlarmNet radio *Requires custom alpha keypad Specifications Electrical Aux. power 12VDC, 600mA maximum Seven hour standby at 400mA aux. load with four amp hour battery 16.5VAC/25VA transformer 50 & 60 HZ Programmable. Alarm output 12VDC, 2.0 amps maximum For UL installations, combined aux. and alarm output cannot exceed 700mA Output Control Zones Eight hardwired zones (15 with zone doubling) Selectable response 10msec, 350msec, 750msec Assignable to any partition 20 selectable zone types plus four configurable zone types Programmable swinger suppression Expansion Devices 4219 – Eight hardwired zones – 16mA 4204 – Up to four relays – 15mA standby (each active relay draws an additional 40mA) 4229 – Eight hardwired zones and two relays – 36mA (each active relay draws an additional 40mA) Accessories 4286 VIP Voice Module – 220mA 5881ENL RF Receiver supports up to eight zones – 60mA, 5881ENM supports up to 16 zones – 50mA, 5881ENH up to 40 zones – 50mA 5883 Transceiver supports up to 40 zones – 80mA Supports Eagle 1225 and 1221 boards Keypads 6160 Custom English (required for programming) – 150mA/40mA (6160) 130mA/40mA (6139) 6270 Graphic Touch Screen Keypad Up To 4. (not recommended for programming.) 6160V Custom English with voice – 150mA/40mA (can be used for programming) 6160RF Custom English With Built In High Transceiver (5883H) (can be used for programming) 6148 Fixed English LCD – 70mA/30mA 6150 Fixed English LCD – 70mA/40mA (6150), 40mA/20mA (6128) 6150RF Fixed English LCD with built-in receiver 105mA/80mA 6150V Fixed English LCD with voice 70mA/40mA Agency Listings Smoke Detectors Communications Touchtone or pulse Formats supported
– ADEMCO Contact ID
– ADEMCO 4 + 2 Express
– ADEMCO low speed
– Sescoa/Radionics 3 + 1, 4 + 1 and 4 + 2 reporting Reporting capabilities
– Split
– Dual
– Split/Dual – True dial tone detection Low battery reports 11.2 – 11.6VDC AC loss and restoral reporting supported
|
|
|
|
| 
