X-10 PHR02 16 Channel Remote Control
Description:
Lets you control up to 16 lights and appliances remotely when used with X10 RF basereceivers.
Has dim and brighten control for incandescent lighting.
Requires any X10 Transceiver (TM751 or RR501) - Sold with transceivers or base stationsincluded in award-winning home automation and security kits like ActiveHome (CK11A)Protector plus (DS7000) and Monitor Plus (DS8700)
PDFInstallation Instructions
Features:
- Battery operated
- RF transmission
- 100 Foot range
- 16 unit control.
The Home Automation RF Remote works with either an X-10 PROSecurity System, such as the PR02000 or with a Transceiver Module (PAT01)to provide remotecontrol of lights and appliances from anywhere in the house.Setting up the Home Automation Remote
Set the codewheel on the Home Automation Remote to the same House Code as the Security
System or the Transceiver Module (PAT01).
Fit four AAA Alkaline batteries in the battery compartment in the back of the remote.
Set the slider switch on the Home Automation Remote to 1-8 to use the ON/OFF buttons to control the first eight Unit Codes, or 9-16 to control the next eight Unit Codes.
Note: It is not necessary to register the Home Automation remotewith the security system.
Note: As with all RF transmitter devices; electrical fields, metaldoors and appliances can cause interference that can decrease the strength of thetransmitted signal. Re-orienting the transmitter or receiver console and antenna mayincrease your ability to send and receive the necessary signals. The receiver should bemounted as high as possible for best reception.
| 
