Ademco 998PI Pet PIR MotionDetector
The new 998PI enhances the industry'sleading PIR by offering pet immunity up to 40 lbs.
By design, the 998PI offers the samelevel of versatility-reliability and ease of installation that made the 998 the industry'smotion sensor of choice.
35' x 45' (10.6m x 13.7m) coverage pattern
Immune to pets up to 40 pounds
Split-Zone Optics technology
EZ-Mount™ features for fast-trouble free installation
Split-Zone Optics splits each zone into two stacked sub-zones. Each sub-zone is the same size as the original, but only has about half the sensitivity. To generate an alarm, a target must intercept both sub-zones simultaneously. A human target is sufficiently large enough while pets up to 40 lbs remain undetected. |  |  |
Specifications:
Detection Method
Passive infrared
Coverage
Pet Immune Lens
35' x 45' (10.6m x 13.7m), 90°
Detection Zones
Pet Immune Lens - 30 zones (8 long range, 7 over 7 intermediate, 4 over 4 short range)
Pulse Count
Intermediate or Standard selectable via DIP switch
NOTE: Use standard for pet immune applications
Detectable Walk Rate
0.5-10ft/sec (0.15-3m/sec)
Mount Height
7.5' (2.3m), nominal
Indicators
Red LED with enabled/disabled via DIP switch
Alarm Relay
Form A, SPST, 90mA@16VDC 15-ohm protective resistor
Input Voltage
10 - 16VDC
(Voltage reversal makes PIR inoperative)
Current
18 mA (non-alarm), nominal
16 mA (alarm), nominal
Standby
Power source should be capable of at least 4 hours of battery standby
Operating Temp
14ºF - 122ºF (-10ºC to +50ºC)
Operating Humidity
Up to 95% RH (max.), non-condensing
Dimensions
2.625 W x 4.375 H x 1.125 D
(67mm x 111mm x 54mm)
STANDARD LENS
| 
